VXT-E58S10-5000-L Rotary Encoder – 58mm, 10mm Shaft, 5000 PPR, Line Driver (RS-422)
5000 PPR for 20,000 counts/rev with 4x decoding. Robust 10 mm shaft and RS-422 output for CNC and precision positioning.
The VXT-E58S10-5000-L is a 58 mm incremental rotary encoder with a ø10 mm solid shaft and a resolution of 5000 pulses per revolution. RS-422 line-driver outputs with complementary signals on three channels (A, B and Z index) reject electrical noise and support long cable runs to motion controllers, servo drives and CNC systems from a 5 V DC supply. A 2 m shielded radial cable, robust housing and ball-bearing shaft support make it well suited to continuous duty on industrial machines.
Key specifications: Housing Ø58 mm | Shaft Ø10 mm solid | 5000 PPR | Line driver RS-422 | A, /A, B, /B, Z, /Z | 5 V DC | 300 kHz | max 3600 rpm | IP54 | 2 m shielded cable.
Key Features:
- Resolution 5000 PPR, A/B quadrature + Z index
- Housing ø58 mm, ø10 mm solid shaft (g6)
- Line driver (RS-422 differential) output
- Supply voltage 5 V DC ± 5 %
- Response frequency up to 300 kHz
- Max. operating speed 3600 rpm (limited by 300 kHz response)
- Shaft load up to 40 N radial / 30 N axial
- 2 m shielded radial cable with open-ended leads
- Synchro flange with ø36 mm spigot, 3 × M4 mounting
- Operating temperature −20 … +85 °C, IP54
Applications: CNC rotary axes, servo positioning, index tables, precision cut-to-length.
Brand: VXT by Voxintech. Supplied across India with datasheet, wiring support and 1-year warranty. Model VXT-E58S10-5000-L is a compatible alternative to equivalent Omron and Autonics encoders; check mounting, shaft and output before replacing.
We are Manufacturer & Supplier of VXT-E58S10-5000-L Voxintech Rotary Encoder in Delhi, Noida, Gurugram, Faridabad, Mumbai, Pune, Ahmedabad and Surat.
More Information About Voxintech Rotary Encoder, Connect with us on +91 9953039482 & Info@voxintech.com
| More Information | |
| Model | VXT-E58S10-5000-L |
| Type | Incremental Rotary Encoder – ø58 mm | 5000 PPR | Line Driver |
|---|---|
| Category | Rotary Encoders / Incremental Encoders |
| General | |
| Encoder Type | Incremental rotary encoder, optical |
| Resolution | 5000 pulses per revolution (PPR) |
| Output Channels | A, B (90° phase shift), Z (1 pulse/rev) |
| Output Circuit | Line driver (RS-422 differential) |
| Supply Voltage | 5 V DC ± 5 % |
| Housing Diameter | ø58 mm |
| Shaft | ø10 mm solid shaft, g6, with flat |
| Connection | Radial cable, shielded, 2 m |
| Protection Degree | IP54 |
| Electrical | |
| Supply Voltage Vcc | 5 V DC ± 5 % |
| Current Consumption | ≤ 100 mA |
| Output Voltage High VH | > 3.5 V |
| Output Voltage Low VL | ≤ 0.7 V |
| Rise Time | ≤ 200 ns |
| Fall Time | ≤ 200 ns |
| Max. Response Frequency | 300 kHz |
| Max. Electrical Speed | 3600 rpm (300 kHz × 60 ÷ 5000 PPR) |
| Max. Operating Speed | 3600 rpm (lower of mechanical and electrical limit) |
| Output Protection | RS-422 compliant differential driver |
| Signal Interface | Use an RS-422 differential receiver; terminate long lines |
| Signal Characteristics | |
| Duty Ratio | X1 + X2 = 0.5 T ± 0.1 T; X2 + X3 = 0.5 T ± 0.1 T |
| Phase Difference A–B | Xn ≥ 0.125 T (n = 1 … 4) |
| Absolute Angle Error | ≤ 0.2 T |
| Cycle Error | ≤ 0.05 T |
| Z Pulse Width | 1 T ± 0.5 T |
| Direction | CW viewed from shaft end: A leads B by 90° |
| Mechanical | |
| Max. Mechanical Speed | 6000 rpm |
| Starting Torque | ≤ 6 mN·m (at 25 °C) |
| Max. Shaft Load | Radial 40 N, axial 30 N |
| Moment of Inertia | 85 g·cm² |
| Mounting | 3 × M4, depth 8 mm, 120° spaced on ø48 mm PCD |
| Cable | ø6 mm shielded, 2 m, radial exit |
| Mass | approx. 360 g |
| Environment | |
| Operating Temperature | −20 … +85 °C (−4 … +185 °F) |
| Storage Temperature | −30 … +95 °C |
| Relative Humidity | 35 … 85 % RH, non-condensing |
| Shock Resistance | 50 m/s², 3 times each in X, Y, Z axes, 6 ms |
| Vibration Resistance | 20 m/s², 10 … 200 Hz, 2 h each in X, Y, Z axes |
| Ordering | |
| Code Key | E58 = housing ø58 mm • S10 = solid shaft ø10 mm • 5000 = PPR • L = line driver |
| Warranty | 1 Year |
| Brand | VXT by Voxintech |
Connection Assignment (Line Driver)
| Wire Colour | Signal | Description |
|---|---|---|
| Red | +V | Supply voltage |
| Black | 0 V | Ground (common) |
| Green | A | Output A |
| White | B | Output B |
| Yellow | Z | Output Z (index, 1 pulse/rev) |
| Brown | /A | Output A inverted |
| Grey | /B | Output B inverted |
| Orange | /Z | Output Z inverted |
| Shield | FG | Cable screen (connect to earth) |
Equivalent Models for This Model:
- Autonics E58SC10 line driver alternative
- Autonics E58 5000 PPR alternative
- Hengstler / Kubler 58mm encoder alternative
Check resolution (PPR), output type, supply voltage, shaft diameter and mounting dimensions before replacing an existing encoder.